(262)673-7560

Injection Molding

Tool trials & short-run production

Part Molding

Let us help you take the stress off! We will provide you first-run parts and a set-up sheet to act as a baseline, saving  time and money upon initial receipt of your new tool.

 

55 ton Milacron Magna 55T Horizontal

    • Dimensions Between Tie Bars: 16.14 in. x 14.13 in.
    • Maximum Mold Height: 14 in.
    • Minimum Mold Height: 7.08 in.
    • Maximum Ejector Stroke: 3.46 in.
    • Screw Diameter: 32 mm
    • Peek Plastic Pressure: 22620 psi
    • Peek Hydraulic Pressure: 2465 psi
    • Intensification Ratio: 1:1
    • Maximum Shot Size: 99 g
    • Maximum Injection Speed: 66 in./sec.

60 ton J60EL3

    • Dimensions Between Tie Bars:  2 in. x 12.2 in.
    • Maximum Mold Height: 11.81 in.
    • Minimum Mold Height: 6.3 in.
    • Maximum Ejector Stroke: 2.36 in.
    • Screw Diameter: 27.9 mm
    • Peek Plastic Pressure: 22770 psi
    • Intensification Ratio: 1:1
    • Maximum Shot Size: 57 g
    • Maximum Injection Speed: 9.00 in./sec.

80 ton J80-ADS-110U (2) 

    • Dimensions Between Tie Bars: 16.14 in. x 16.14 in.
    • Maximum Mold Height: 20.0 in.
    • Minimum Mold Height: 5.9 in.
    • Maximum Ejector Stroke: 3.64 in.
    • Screw Diameter: 35 mm
    • Peek Plastic Pressure: 32000 psi
    • Intensification Ratio: 1:1
    • Maximum Shot Size: 105 g
    • Maximum Injection Speed: 9.84 in./sec.

85 ton J85-AD-110H

    • Dimensions Between Tie Bars: 16.14 in. x 14.13 in.
    • Maximum Mold Height: 18.11 in.
    • Minimum Mold Height: 7.08 in.
    • Maximum Ejector Stroke: 3.15 in.
    • Screw Diameter: 35 mm
    • Peek Plastic Pressure: 32,633 psi
    • Intensification Ratio: 1:1
    • Maximum Shot Size: 105 g
    • Maximum Injection Speed: 6.66 in./sec.

110 ton J100-ADS-110U

    • Dimensions Between Tie Bars: 18.11 in. x 18.11 in.
    • Maximum Mold Height: 21.65 in.
    • Minimum Mold Height: 5.9 in.
    • Maximum Ejector Stroke: 3.93 in.
    • Screw Diameter: 40 mm
    • Peek Plastic Pressure: 24,946 psi
    • Intensification Ratio: 1:1
    • Maximum Shot Size: 137 g
    • Maximum Injection Speed: 9.84 in./sec.

110 ton J110-AD-110H

    • Dimensions Between Tie Bars: 18.11 in. x 16.14 in.
    • Maximum Mold Height: 17.71 in.
    • Minimum Mold Height: 7.87 in.
    • Maximum Ejector Stroke: 3.93 in.
    • Screw Diameter: 35 mm
    • Peek Plastic Pressure: 32,633 psi
    • Intensification Ratio: 1:1
    • Maximum Shot Size: 105 g
    • Maximum Injection Speed: 6.66 in./sec.

140 ton J140-AD-180H

    • Dimensions Between Tie Bars: 20.86 in. x 18.11 in.
    • Maximum Mold Height: 17.71 in.
    • Minimum Mold Height: 7.87 in.
    • Maximum Ejector Stroke: 3.93 in.
    • Screw Diameter: 45 mm
    • Peek Plastic Pressure: 22,770 psi
    • Intensification Ratio: 1:1
    • Maximum Shot Size: 203 g
    • Maximum Injection Speed: 5.83 in./sec.

220 ton MA 2000

    • Dimensions Between Tie Bars: 20.87 in. x 20.87 in.
    • Maximum Mold Height: 21.65 in.
    • Minimum Mold Height: 7.87 in.
    • Maximum Ejector Stroke: 5.5 in.
    • Screw Diameter: 50 mm
    • Peek Plastic Pressure: 27,122 psi
    • Peek Hydraulic Pressure: 2,320 psi
    • Intensification Ratio: 11.7:1
    • Maximum Shot Size: 412 g
    • Maximum Injection Speed: 4.36 in./ sec.

530 ton MA 4700

  • Dimensions Between Tie Bars: 32.28 in. x 31.5 in.
  • Maximum Mold Height: 30.71 in.
  • Minimum Mold Height: 12.60 in.
  • Maximum Ejector Stroke: 7.8 in.
  • Screw Diameter: 84 mm
  • Peek Plastic Pressure: 20,741 psi
  • Peek Hydraulic Pressure: 2,030 psi
  • Intensification Ratio: 10.2:1
  • Maximum Shot Size: 125.05 cu. in.
  • Maximum Injection Speed: 4.28 in./sec.

730 ton JU6500 II / 4500

  • Dimensions Between Tie Bars: 40.94 in. x 35.83
  • Maximum Mold Height: 37.4 in.
  • Minimum Mold Height: 15.75 in.
  • Maximum Ejector Stroke: 9.84 in.
  • Screw Diameter: 80 mm
  • Peek Plastic Pressure: 28,862 psi
  • Intensification Ratio: 11.4:1
  • Maximum Shot Size:               135 cu. in.
  • Maximum Injection Speed: 4.68 in./sec.

900 ton MA8000 ll S/8400

  • Dimensions Between Tie Bars: 39.37 in. x 39.37 in.
  • Maximum Mold Height: 39.37 in.
  • Minimum Mold Height: 16.54 in.
  • Maximum Ejector Stroke: 11.02 in.
  • Screw Diameter: 110 mm
  • Peek Plastic Pressure: 29,580 psi
  • Peek Hydraulic Pressure: 2,900 psi
  • Intensification Ratio: 10.2:1
  • Maximum Shot Size: 272 cu. In.
  • Maximum Injection Speed: 3.76 in./sec.

1120 ton JU10,000/8400 (2)

  • Dimensions Between Tie Bars: 56.3 in. x 46.5 in.
  • Maximum Mold Height: 47.25 in.
  • Minimum Mold Height: 25. 6in.
  • Maximum Ejector Stroke: 13.75 in.
  • Screw Diameter: 110 mm
  • Peek Plastic Pressure: 26,776 psi
  • Peek Hydraulic Pressure: 2,538 psi
  • Intensification Ratio: 10.5:1
  • Maximum Shot Size: 155 oz
  • Maximum Injection Speed: 3.76 in./sec.

Supporting Equipment

  • RJG E-dart
  • Resin dryers
  • State of the art water system
  • Multi-zone controllers for any hot system requirements
  • Hydraulic or pneumatic valve gate options
  • Multi-material colorant mixer
  • Hot water heater, able to heat to approximately 350 degrees.

Contact us today for a tour of our world-class molding department!

Need more information on a molding trial?

Molding Trials